There is one or two firms that produce historical correct reproductions. Cases were made by local craftsmen according to the whishes of the owner:As the clocks were not cheap in their times compared to eg.
So they often were made of cheap wood pine decorated with paint imitating oak or wallnut and floral decoration. The early ones had beautyfull wallnut cases hard to get or oak like one of mine. Scottie:There were time-only models with pinwheel esc. They are great Easy to handle for the beginner,good construction,friendly for maintenance,strong good quality of wheels and pinions,even the verry old ones rarely show wear.
Shall dating morbier clocks has
They keep good time and can be put to dayly use. They are my favorite tallcase clocks. Well, now that I think about it, there is a STRONG resemblance between Comtoises and conventional if the adjective is appropriate pinwheels - both with "I" type plates and looking like a cage.
Hi Friends esp. Box is massive oak with inlayed bands of birch or ash and wallnut,the same style the pinecases are. Exept of cleaning nothing was to do with the case.
Comtoise, Morbier Clock
The mvmt got the regular treat:cleaning ,pivot pollishing and oiling,new ropes installed,new weights for the alarm which throws You out of bed through several floors. My favorite tallcase! Comptoise Looks like the one I had, sans of course, case and alarm. They're fun. Greetings Burkhard, Great clock! I have been told that the red weight cord is the authentic cord for these clocks Best, Richard T.
I have been here for over a year and will stay one more. I travel regularly to France and have visited innumerable flea markets, broncantes and vide greniers, as well as the big antique fairs in beziers, Avignon and Montpellier, among others. True, the good days are either gone or going, but on a good day you can still find a Morbier of the regular type: two train, one bell, simple lyre pendulum and if you are really lucky a nice porcelain dial and hands, ok for around euros.
I have three in Madrid which I purchase for less than that. I was not bragging about my pinwheel, just documenting it. They are very rare. I found mine in Mexico City several years ago. Complete mechanically but with no dial. I made a lucite dial and it looks fine.
Cleared dating morbier clocks suggest
I will send picture when I get back to California next year. I also have a crown wheel that works very well. Crown wheels are a bit more difficult to get going and, in my view, are more subject to wear over the years. When I said they are still made today I did not mean as a family industry like of yore, but as faithful reproductions.
I have even seen miniature ones.
Morbier Clocks - History, Identification, and Repair by Lawrence A. Seymour " x 11", perfect bound, 66 pages. At last! A definitive reference on the history, identification, production, and repair of those ubiquitous and fascinating French Morbier clocks from France's Haut-Jura area. This reprint from the s NAWCC Bulletin articles. Make Offer - Antique French MORBIER COMTOISE WALL CLOCK c Strike 8-Day Date Key WORKS Clock, Standing Longcase, French Fruitwood Morbier, s, Outstanding Antique! $1, Dec 17, The spiral gong used in these clocks was used from until about REF: Comtoise Clocks, The Morbier, The Morez, Maitzner & Moreau, Dating chart, page These movements ususlly clean up very well. The movement photo is of a "Crown Wheel" (verge) movement older than the one that you have. Best Richard T.
If you are into Morbiers there is also a later spring driven one, often cased in French wall clocks, some called "bull's eye". I do like them!
I am not a dealer, just a collector. My pinwheel partiality is due to my current interest in tower clocks, of which I have two in Madrid, being restored, slowly, in my scarce free time. I am a university professor on assignment in Spain. I welcome more stuff on Morbiers. My posts on the tower clock page goes unanswered.
Regards to all, even Morbier haters. Sep 18, 0 16 Vancouver B. Country Flag: Region Flag:. There is a company in Germany called Deckert that makes morbier clocks. These are exact reproductions of the originals and excellent in quality.
They have a website with prices. The also make parts for repairing and restoring originals. Cheers Gerry. Sep 5, 14 18 Country Flag:.
I have a 2-train anchor escapement comtoise that has a rather unusual striking mechanism as : a there is no snail b the vertical rack is very short with only 3 teeth c the minute wheel has a pointed device that activates the strike train to deliver three double-blow on the bell every five minutes.
It would appear to me the clock was not designed for domestic use and I have not been able to find information so far on this rather unusual comtoise. I wonder if it was especially designed as a 5-minute timer.
I would greatly appreciate for information relating to the use of such a striker. Thank you. Mun C. Comtoise spoke wheel. JPG File size: Comtoise 3-tooth rack.
Comtiose anchor. Hi Friends! Giorgio,I live in Germany,but spent my last hollydays in France. The dealers I knew that had lots of Comptoises in the past have run out of stuff.
The French Morbier clock is known as a privincial clock, to distinguish it from clocks made in major urban centres, primarily Paris. The clock was named after the village of Morbier, located about 30 miles North to North-West of Geneva on a trade route, la route nationale 5, between Paris and Geneva.
Comptoise II The pinwheelers for Scottie:. Yep; It's a beaut; A keeper. The conducting of the zaag takes place via a free space in the top plate.
A Mayet-clock ca. The I with the star before the name Mayet is found on several clocks of B. It is not clear whether this I with the star indicates first quality or mastership in the clockmakers' guild. It's more likely, however, that B. Mayet is the eldest son of Ignace Mayet from Morbier and that in this way he wanted to claim the rigths of the family tradition and property.
This is contradictory to the common right of inheritance in the Jura, whereby the youngest descendant would inherit the properties of the family. One of the Mayets' clearly signed his clocks with "Mayet cadet" Mayet junior. A one-handed Comtoise of the Mayet-type from the Jura, manufactured by P. Apart from two exquisite and flawless clocks, nothing further is known about the Brocard family. The movement has been built skillfully and finished to such a degree that this clock can be considered as the top of the Mayet-period ca.
Maximin Cattin. A Comtoise with two hands from the Jura with quarter-stroke on 3 bells. The clocks from the Cattins and Brocard workshops belong to the top of the Jura clock production.
Comtoise weights. A stone and forged weight made outside the Jura for Comtoises. The forged weight is one of the original weights of the clock in picture 1.
The next two weights are from the Mayet-period. The first two weights are examples of the approximately 30 different forms applied between and Within the third weight the caster has sought a solution to avoid the cast-in hook.
The last one is a leaden weight from the Mayet period 8a 8. Three leaden pear shaped pendulum bobs from the Mayet-period. A Comtoise of the Mayet-period equipped with the Chevalier de Bethune escapement.
On the top-left of the post one can see screws to adjust the two axes, that are connecten to the pallets. Although originating from the Jura, the striking train features a pivoting rack.
The clock has a very logical construction which is furthermore emphasized by the perfect finish. Remarkable in this clock by Abel Thovvarez is the day indication between the shutters.
It is a Comtoise of the Mayet-type, of which the brass dial plate has evidently been replaced by an enamelled plate by Abel Thovvarez himself, witness the Abel T.
Striking is the fact that the striking train has been placed on the left, while the going train is on the right. Only in this set-up the double rack construction occurs, which is here operated by two skillfully forged levers. The hook that has been fitted above the bell, serves to strengthen the pendulum suspension housing.
From dating morbier clocks you
The pewter chapter ring is an addition of a later date. Both the appearance and the construction do significantly differ from the customary standard that was created in the Jura in this period. It is a clock that can easily bear comparison with the highlights from the Mayet period in the Jura. The skeleton of this clock has been entirely forged, which is a deviation of the generally applied system in this area to secure the top plate with nuts.
The going train has been fitted on the right, the striking train on the left. Typical for this area is the pivoting rack, resulting in a construction of the direct half-hour stroke and the repetition on demand. The escape wheel has been placed on top of the top plate and the pendulum swings at the left side of the movement.
The pendulum has a thread-suspension and rather little play in the crutch. This is the single known example of a Comtoise probably used on inland waterway vessels. The movement is totally up to standards however it lacks the typical delicate craftsmanship of clocks from the Jura.
One of the characteristics of these clocks, the opposite numbering of the posts, right front, right back, left back, left front, can be seen on the front posts. It is rather contradictory, that in the trade this clock is referred to as the Lyon clock.
Dating morbier clocks
Back side of the clock of picture The suspension of the pendulum has not been done with a slingerhuis, but the pendulum has been 'thread suspended' to a pin welded to the bell strap. The big wheel between the going train and the striking-parts is the hour wheel.
The pinnacles and the feet serve as nuts to fix the 'bird cage' skeleton construction of the movement. Ici Reposent. Shortly after ca.
It is unknown, when the Midol family left the Jura and started a clock workshop. The movement of his dated specimen bears testimony to a sound craftsmanship and ingenuity, that surpasses many specimens from the Jura till this point in time.
A 'Cartouche clock' from the workshop of Jean Baptiste Mayet ca. The first Cartouche clocks do strongly remind us of the first type of Comtoise clocks with a brass chapter ring. Cartouche Comtoise ca. The front plate to which the cartouche plate has been mounted, was made of brass.
Although this clock is one-handed, the minutes indication on the rim of the dial suggests that this type of dial was used both for one-handed clocks and two-handed clocks.
Jean Baptiste Martinet is one of the clockmakers from the Jura of whom clocks like this one from ca. What catches the eye, is the cast centre piece of the cartouche dial showing remnants of royalist symbols deleted during the French revolution. An exceptional striking train in a Cartouche-Comtoise. Dimensions 32 cm wide, 60 cm tall.
These large size Comtoises were, and still are, in use as church, public or castle clocks. The applied striking mechanism looks very Southern, more specific Spanish. The first type of Comtoise with an enamel dial from Morez. The enamel dial has really been 'baked', full of knobs and thick of material.
This type is a long way from the exquisite skill of the enamellers after It is one of the reasons why the first Comtoise version with enamel dial from Morez is extremely rare. A 'month going' Comtoise. The winding holes have not been placed in the dial but underneath it. The winding-holes can be shut off with shutters ca. Bronze casted ornaments since ca. The first type of top ornament, in which the coq looks over its shoulder ca.
One of the four models, specially designed for Comtoises. Comtoise ca.
Dating Comtoise clocks. Type & Dial: Period: Pendulum and pendulum suspension housing (cheminee). Fronton i.e. ornaments above or surround dial. Very little is known about pre comtoise clocks from the Jura. Mayet. Brass, Pewter chapter ring. One hand. Verge escapement. Striking on bell. Louis XIV Makers: Mayet Cattin. When it comes to dating clocks there is only one hard and fast rule and that is, "There are no hard and fast rules." This is especially true for Morbier clocks. Unlike most mass produced clocks, the Morbier was not made in a factory. The Morbier was in fact the product of many families workingFile Size: KB. le morbier: Comtoise: Compilation | | | | | | | | v iew 'Dating comtoise clocks table': B ack to bullbreedadvisoryservice.com: Thanks to: Ton Bollen 'Comtoise clocks', ISBN 90 3. Compiled by Fred Kats. Comtoise clock. (More about the Comte region)A form of provincial, weight-driven clock originally made in the vicinity of Morbier in the Franche*-Comte region of.
Whether the clocks were actually manufactured in Toulouse or were merely assembled there, remains unknown. Rare clock with rotating moon ca Signed: F. Farjaire a St. Claude Francois This clock, fitted with a ceramic dial plate doesn't differ from the type, that was produced in the Jura in this period. Rather primitive both in construction and in execution. It is a verge escapement which is very rare for this region.
The ceramic dial, the pewter fronton and the pinnacles give this clock its own character, distinguishing itself from the clocks from the Jura and thereby claiming its own place. A 'coq clock', like a it ought to be. Here fitted with a date indication ca.
M ore on the cock as a French symbol. The movement of a 'coq clock' of picture Behind the hands, two of the three wheels of the date mechanism can be seen. The pin on the wheel on post no Another fine 'coq clock'. The Francois family is one of the few families of clockmakers, that were active in this region.
This clock was made for a church or monastery, due to the mitre, the crozier and the monogram in the middle of the fret. Below the monogram, two swans. Backside of a Comtoise 'coq', that was built as a wall clock. The iron strip on the top plate serves to fix the pendulum. At the same time it acts as the hook for hanging the clock either on the wall or on the interior of a case.
Two points spikes press into the wall or the wood, preventing the clock from slipping. The quarters are counted on an extended snail fixed on the cannon wheel.
Spending superfluous dating morbier clocks pity
The clock indicates the days of the week, the phases of the moon, and even the months of the year. Depending on the height, at which the clock is hung up, it runs three to five months ca. The movement of the Comtoise with seconds indication of picture It is a pin wheel escapement with a central placed pinwheel of which the axe has been extended through the centers of the minute pipe and hour wheel. A cast bronze fronton with Phrygian cap liberty cap. M ore on the Phrygian cap.
M ore on 'cld hands'. The movement of a clock with concave centre dial. The pin wheel has been cross-placed between the mounting posts.
Ca The phrygian cap and 30 day month are typical revolutionary features. The Phrygian cap and 'days month' points unmistakably to a "Revolutionary" date.
C alandrier decimale republicain. E mblems and Symbols of the French Republic. The call for a constitution became stronger and stronger. On the right barrel a Phrygian cap. Around the dial two resting figures, that do not seem to be impressed with the revolutionary ideas ca.
The date of on this Comtoise is interesting.